GT Range | Generator for analytical grade air with ultralow hydrocarbon, carbon oxides, nitrogen oxides and sulphur oxides levels (GT Series)

Key Features

• Specifically designed to supply analytical grade air with ultralow hydrocarbon, carbon oxides, nitrogen oxides and sulphur oxides levels for a wide range of analytical applications
• Utilises platinum catalytic oxidation technology to reduce hydrocarbon levels in output gas to <0.1 ppm
• Removes water vapour to reduce the dew point to -50°C
• Maximum flow rate from 1.5 L/min. up to 30 L/min. depending on model
• Inlet gas pressure up to 10 bar

Description

The GT series of generators have been specifically developed to provide analytical grade air with ultralow hydrocarbon, carbon oxides, nitrogen oxides and sulphur oxides levels for:

• Continuous emissions monitoring (CEM)
• Carbon dioxide analysers
• Emissions analysers
• Stack gas samplers
• Total organic carbon analysis
• Gas chromatography using flame ionisation detection (GC-FID)
• Gas chromatography using nitrogen phosphorous detection (GC-NPD)
• Gas chromatography using flame photometric detection (GC-FPD)
• Total hydrocarbon analysers
• Process control applications

Instrument Configurations

Model Number	Flow Rates (L/min)
GT1500	1.5
GT3000	3
GT6000	6
GT15000	15
GT30000	30

Specifications

Maximum flow rate per minute	1.5 L/min. to 30 L/min. depending on model
Hydrocarbon level (output gas)	<0.1 ppm
Carbon monoxide level (output gas)	<0.1 ppm
Carbon dioxide level (output gas)	<5 ppm
Nitrogen oxides level (NO x: output gas)	<0.1 ppm
Sulphur oxides level (SO x: output gas)	<0.1 ppm
Dew point	-50°C
Inlet pressure	4.5 bar - 10 bar (65 psi - 145 psi)
Inlet air quality requirement	Clean dry compressed air ISO8573-1:2010 Class 3.2.2
Inlet connection	1/4" compression
Maximum outlet pressure	1 bar (15 psi) drop from inlet pressure
Outlet connection	1/8" compression
Maximum hydrocarbon level in inlet gas	100 ppm
Maximum carbon monoxide level in inlet gas	50 ppm
Purification technology	Platinum catalyst
LED indicators	Power on/off : system ready : errors
Warm up time	45 minutes
Power requirements	220-240 VAC: 50 Hz
Instrument dimensions (W x D x H)	GT1500, GT3000 and GT6000: 550 mm x 230 mm x 410 mm | GT15000 and GT30000: 630 mm x 310 mm x 470 mm
Weight	9 Kg to 25 Kg depending on model
Certification	CE, MET, FCC

Back to home page